GETTRON, gt4

The hEATED GETTER TYPE PURIFIER

Tronic Purity’s GETTRON® line implements getters, which consist of zirconium alloys in the form of porous pellets that come in a myriad of sizes, as the main adsorption mechanism. The GETTRON® series, like many getter purifiers, is a heat-induced model that typically operates at around 300-400℃, depending on the targeted gas and impurities.

Zirconium (Zr) alloys that contain aluminum (Al), iron (Fe), and vanadium (V) have been used for gas purification for over 40 years. These alloys have great reactivity with a broad range of gas species, such as H2O, O2, CO, CO2, H2, N2 and CH4. Heat plays a fundamental role in the overall reaction. The chemical equations shown below occur on the surface of the getter pellets, and the reaction products then diffuse into the core of the getter alloys, clearing up fresh surfaces so that adsorption can be reactivated continuously.

The GETTRON® GT4 series purifier uses PLC as the main control system, 7-inch touchable human-machine interface, MODBUS communication protocol, providing more convenient operation and stable operation.

      Numbering System 

image

150 / 300 slpm, Heated Getter Type Rare Gas & Nitrogen Purifier.

GT4 680 820 2
GT4-150/300-R/N

Standard Features

Controller
  • Fully Automated Controller by Programmable Logic Controller.
  • 7” Touchable HMI.
  • Instrument Air Pressure Switch.
  • High Pressure Relief Vent.
  • PLC MODBUS Communication Port, Ethernet, RJ45 Connector.


Gas Panel & Hardware
  • Inlet and Outlet Actuated Valves.
  • Auto Bypass Actuated Valve.
  • Over Pressure Safety and Getter Protection Vent.
  • Hydrogen Removal Unit.
  • 0.003μm Particle Filter, Metal.
  • Metal Enclosure.

200 / 400 slpm, Heated Getter Type Hydrogen Purifier.

GT4-H, Hydrogen Purifier
GT4-200/400-h

Standard Features

Controller
  • Fully Automated Controller by Programmable Logic Controller.
  • 7” Touchable HMI.
  • Instrument Air Pressure Switch.
  • High Pressure Relief Vent.
  • PLC MODBUS Communication Port, Ethernet, RJ45 Connector.


Gas Panel & Hardware
  • Inlet and Outlet Actuated Valves.
  • Auto Bypass Actuated Valve.
  • Over Pressure Safety and Getter Protection Vent.
  • Z-Purge for Electrical Bay
  • 0.003μm Particle Filter, Metal.
  • 4" Exhaust Duct.
  • Metal Enclosure.
GT4 Data Sheet
GT4- Purity Data Sheet.
Brochure Download