Tronic Purity’s GETTRON® line implements
getters, which consist of zirconium alloys in the form of porous pellets that
come in a myriad of sizes, as the main adsorption mechanism. The GETTRON® series, like many getter
purifiers, is a heat-induced model that typically operates at around 300-400℃, depending on the targeted gas and
impurities.
Zirconium (Zr) alloys that contain aluminum
(Al), iron (Fe), and vanadium (V) have been used for gas purification for over
40 years. These alloys have great reactivity with a broad range of gas species,
such as H2O, O2, CO, CO2, N2 and CH4.
Heat plays a fundamental role in the overall reaction. The chemical equations
shown below occur on the surface of the getter pellets, and the reaction
products then diffuse into the core of the getter alloys, clearing up fresh
surfaces so that adsorption can be reactivated continuously.
The GETTRON® purifiers have incorporated this long-standing technology with an operator-friendly human-machine interface, bringing our clients a trusty solution to handle various challenging tasks.
GETTRON, PLATFORM - GT1
GETTRON, PLATFORM - GT2
Model No.: GT2-R/N-1/2
Maximum Flow Rate: 10 slpm
Connection: 1/4" MVCR.
Power : 110 VAC/220 VAC
GETTRON, PLATFORM - GT3
Model No.: GT3-R/N/H-1/2
Applicable Gas: Rare Gas / Nitrogen / Hydrogen
Normal Flow: 20 slpm
Maximum Flow: 80 slpm
Connection: 1/4" FVCR
PLC base controller with MODBUS output
4.3" Toubleable Color HMI
Power : 110 VAC/220 VAC, 1P+E, 50/60 Hz
GETTRON, PLATFORM - GT4
Model No.: GT4-R/N
Applicable Gas: Rare Gas / Nitrogen
Flow Rate: 150 / 300 slpm
Connection: 1/2" FVCR
PLC base controller with MODBUS output
7" Touchable Color HMI
Power : 220 VAC, 1P+E, 50/60 Hz
GETTRON, PLATFORM - GT5
Model No.: GT5-10~100-R/N
Flow Rate : 10 ~ 100 Nm3/Hr
Power : 220 VAC/3P+E, 50/60 Hz
PLC base controller with MODBUS output
12" Touchable Color HMI
Power : 220 VAC/1P+E, 50/60 Hz